User's Manual 

Product Description

Prolong The Life Of Your Battery!

The smart battery protection system shields your device from getting over charged, over load, discharge, over heated, reverses polarity and also provides efficient short circuit protection. It can handle 520W Solar Panel on 12v battery system or 1040W Solar Panel on 24v battery system. Works equally great for home, industrial or commercial use. Designed for optimum and safe charging performance.

Technical Data

40A MPPT Charge Controller Nominal System Voltage: 12V, 24V

Rated Charge Current: 40A

Rated Load Current: 20A

Max PV Open Circuit Voltage: 150V / 138V

Max PV Input Power: 520W (12v battery) / 1040W (24v battery)

MT50 Remote Meter Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

Remote Temperature Sensor Acquisition of battery temperature for undertaking temperature compensation of control parameters Length: 3 M

USB to RS485 Converter Adapter This adapter is used to monitor each controller on the network using Solar Station PC software and update the firmware.

SolarEpic Tracer4215BN 40amp Solar Charge Controller Feature:

 

1. Negative Grounding, 150V /138V PV Input
2. Metal Case allows for natural heat dissipation
3. Support 4 charging options: Sealed, Gel, Flooded and User
4. 4 Stage Charging
5. Serial connection (string) of PV modules allows minimize the charging current as a way of saving the energy
6. Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%
7. Ultra-fast tracking speed and tracking efficiency
8. Features Standard Modbus Interface with RS485 Port

 

MPPT Solar Charge Controller 40A Tracer4215BN Schematic Diagram

   VIDEO DEMO

 Latest product information（For more product video please click here） 

User's Manual

Product Description

MPPT Solar Charge Controller 100A EPEVER Tracer 10420AN

Based on common negative design and advanced MPPT control algorithm

MPPT Charge efficiency > 99%

Technical Data: Nominal system voltage:12/24/36/48VDC auto work

Rated charge current :100A

Battery input voltage range: 8-68V

Max. PV open circuit voltage:200V(at minimum operating environment temperature) 180V(at 25℃ environment temperature)

MPP voltage range:V(BAT)+2V～144V

Max. PV input power: 1250W/12V battery, 2500W/24V battery , 3750W/36V battery, 5000W/48V battery system

Max Wire Size: #2 AWG(35mm2)

Recommended Wire Size: #2 AWG(35mm2)

Weight: 7.4kg

MT50 Remote Meter

This unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar. And it's NOT compatible with RN series MPPT charge controller. Description MT-50, a new-generation remote display for EPEVER MPPT controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of mppt solar controllers.

Technical Data Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

 

EPEVER Tracer AN series mppt solar charge controller (100A)

Based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.

MSRT can give a very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system;

Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel.

The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.

 

 

   VIDEO DEMO

 Latest product information（For more product video please click here） 

User's Manual

Product Description

40A EPEVER Tracer 4210AN MPPT Solar Charge Controller

Based on common negative design and advanced MPPT control algorithm

MPPT Charge efficiency > 99%

 

Technical Data: Nominal system voltage:12/24VDC auto work

Rated charge current :40A

Rated discharge current: 40A

Battery input voltage range: 8-32V

Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)

MPP voltage range:V(BAT)+2V～72V

Max. PV input power:520W(12V Battery) & 1040W(24V battery)

Power terminals:#6 AWG(16mm2)

 

MT50 Remote Meter

This unit is compatible with Tracer A(N) , TRIRON N, Tracer BN, VSxxxxBN series controllers ONLY from EPsolar. And it's NOT compatible with RN series MPPT charge controller. Description MT-50, a new-generation remote display for EPEVER MPPT controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of mppt solar controllers.

Technical Data Faceplate dimension:98×98 mm / 3.86×3.86 inch Frame dimension:114×114 mm / 4.49×4.49 inch Connector type: RJ45 Meter cable:Standard 2m,Max 50m Ambient Temperature: -20°C -- +70°C/-4°F -- 158°F

Something you should know for Lithium Batteries Charging

1. When a lithium-ion battery is used, the system voltage cannot be identified automatically, please confirm the battery system voltage before installation.
2. When you choose lithium battery as a battery type, the temperature compensate coefficient would be 0, and cannot be changed.
3. This MPPT solar charge controller can work under full load in the ambient temperature range. when the internal temperature reach 81℃, the power reduction mode will be turned on.
4. Lithium battery type can ONLY be set on a cellphone app or "solar station monitor" PC software.

Schematic Diagram

Warm tips：

Step: Connect the system in the order of 1.battery-->2. load-->3.PV array, and disconnect the system in the reverse order 3. 2. 1.

• NEVER connect the soalr panel array to the controller Without/Before a Battery.
• Battery must be connected FIRST !!!
• DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller!
• If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
• The wire size is only for reference. If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance. 

How to program for Lithium Battery？

1. Via PC (Accessories needed：RS485),
2. Via phone APP (Accessories needed：Ebox-Wifi or Ebox-Blue)
Software download website: EPever official website or look for in the manual

   VIDEO DEMO

 Latest product information（For more product video please click here） 

Description

User's Manual

Lithium Battery MPPT Solar Charge Controller.

Epever 10A/15A/20A/30A-12V/24VDC Auto.

Max pv input voltage :60V(10A/15A/20A) or 100V(30A).

Waterproof class  : IP65

The Tracer BP series solar charge controller adopt to the advanced Maximum Power Point Tracking charging methods, it enables the system charging and discharging management to obtain the most radical optimization. Increase the system flexibility,yet lower down the system cost. The controller support a variety of battery, for example sealed, gel, flooded and lithium battery. User can view and modify the working status and parameters. It can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.

Models：

10A : Tracer2606BP 130W/12V 260W/24VDC ,max pv 60V.

15A : Tracer3906BP 195W/12V 390W/24VDC ,max pv 60V.

20A : Tracer5206BP 260W/12V 520W/24VDC ,max pv 60V.

30A : Tracer7810BP 390W/12V 780W/24VDC ,max pv 100V.

Features：

• Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
• Wide working environment temperature(-40℃～60℃)
• Apply to lithium battery(LiFePO4/Li-NiCoMn)and battery(Sealed/Gel/Flooded)
• Lithium battery self-activating and low temperature protection function
• Maximum conversion efficiency of 98%
• Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99%
• Ultra-fast tracking speed and guaranteed tracking efficiency
• Accurately recognizing and tracking of multiple power points
• PV power limitation function
• Monitoring and setting parameter via Mobile APP, PC Monitor setting software with RS485 communication interface.
• Use of standard Modbus communication protocol for RS485 bus connections, communication protocol compatibility much better
• Connecting the IOT(Internet of Things) module and Cloud Server monitoring software to realize remote monitoring of the multi-machine system
• The RS485 connector can provide power supply
• Aluminum housing for better cooling
• Real-time energy statistics function
• IP67 waterproof degree
• Long lifespan design，five years warranty

Load working mode:

• Manual Mode
• Light ON/OFF(Default)
• Light ON + Timer
• Real-time Control
• Intelligent Power Mode

Electronic protections:

• PV over current protection
• PV short circuit protection
• PV reverse polarity protection
• Battery reverse polarity protection
• Battery over voltage protection
• Battery over discharge protection
• Battery overheating protection
• Lithium battery low temperature protection
• Load overload protection
• Load Short circuit protection

Technical specifications 

※ Lithium battery do not automatic identification system voltage and no temperature compensation coefficient.

* Programmable voltage value by SPP-02 , RC-02 and APP.

    VIDEO DEMO

Send from USA,2-8 working days delivery with tracking.

1300W grid tie inverter,DC18V or 24V to AC110V or 220V pure sine wave inverter.

MPPT solar inverter,50/60hz auto,CE.

Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system.

The output need to be connected to the grid power. Can not supply power directly to the AC loads.

Warranty

1 Years Warranty

What's In Box

• 1 x 1300W Grid Tie Inverter
• 1 x User's Manaul
• 1 x AC Cord (US)

User's Manual

Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer AN Series Max Input 150V /200V

Tracer-AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability and high industrial standard. MSRT can guarantee very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer-AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel. The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.

Features:

• High quality and low failure rate components of ST and IR ensure the product’s service life
• 100% charging and discharging in working environment temperature range
• Maximum DC/DC transfer efficiency as high as 98.7%
• Advanced MPPT technology & ultra-fast tracking speed guarantee tracking up to 99.5%
• Advanced MPPT control algorithm minimize the MPP loss rate and loss time
• Accurate recognition and tracking of multiple-peaks maximum power point
• Wide MPP operating voltage range
• Limit the charging power and current over rated value
• Support 4 charging options: Sealed, Gel, Flooded and User.
• Battery temperature compensation function
• Real-time energy statistics function
• Automatic over-temperature power reduction function
• Load relay control to realize diversified load work modes
• Auto-control of utility and generator relay design
• Remote temperature sensor and remote voltage sensor design, collect more accurate data of battery temperature and voltage value
• Isolated RS-485 with 5VDC/200Ma protected output for no power devices, with MODBUS protocol
• Monitor and set the parameters via mobile phone APP or PC software

Parameters

User's Manual

Epever MPPT Solar Charge Controller Battery Charger Regulator Tracer AN Series Max Input 100V 

 Features：

• Advanced MPPT technology, with efficiency no less than 99.5%
• Ultra-fast tracking speed and guaranteed tracking efficiency
• Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
• Wide MPP operating voltage range
• High quality components, perfecting system performance, with maximum conversion efficiency of 98%
• Accurate recognition and tracking of multiple-peaks maximum power point 
• International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life
• Charging power and current limitation function
• Compatible with lead-acid and lithium-ion batteries
• Battery temperature compensation function
• Real-time energy statistics function
• Overheating power reduction function
• Multiple load work modes
• The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection. 
• With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
• Monitor and set the parameters via mobile phone APP or PC software 
• Full-load operation without any drop in capacity within the range of working environment temperature 
• Extensive electronic protection

Electrical Parameters&nbsp

①When a lead-acid battery is used, the controller hasn’t the low temperature protection.

②At minimum operating environment temperature

③At 25℃ environment temperature

④When a lithium-ion battery is used, the system voltage can’t be identified automatically.

Mechanical Parameters

   VIDEO DEMO

 Latest product information（For more product video please click here）